
DLM 600半機架寬的低功率可編程直流電源
電壓:5V - 300V
電流:2A - 75A
功率:375W - 600W
概述:半機架寬的低功率可編程直流電源
此類電源使用零電壓開關(ZVS)技術實現極低的紋波和噪聲,性能可媲美較昂貴的線性電源。此外,DLM 600 的高效率和快速負載瞬態響應讓其成為要求苛刻的應用的理想選擇。
對于需要高密度、多組輸出的小型機架安裝臺式應用,DLM600 是理想的選擇。 其輸出電壓范圍是 0~5 VDC 至 0~300 VDC;輸出電流范圍是 0~2 A 至 0~75 A。
冷卻空氣的入口位于前部和側面,而排氣口則位于后部和側面。其風扇能根據環境空氣的溫度和負載進行變速控制,從而降低噪音并延長風扇壽命。如此一來,就可以將電源重疊起來,電源之間也不需要有空隙,從而實現最大的機架密度以及 0~50°C的工作溫度范圍。可選的機架安裝套件讓用戶輕松將一到兩個單元并列擺放。
DLM 600 電源系列的前面板布局易于操作。用戶也可以通過單獨的10-轉電位器旋鈕設置電壓和電流參數。用戶能通過按鈕控制數種功能,包括電源開啟、輸出開啟、本地/遠程連接、電壓/電流預覽和過壓保護預覽。此外,還能可通過 2 個 3½ 數字 LED 顯示屏查看電壓/電流的設定值或?qū)嶋H值。
DLM 600 近線性直流電源可以串聯或并聯使用。所有型號均可自動接收任何標準的單相輸入,無需手動設置。
600 W,1U(1.75 英寸)高,半機架(8.5 英寸)寬;無需頂部或底部凈距
紋波低至 2.5 mV (均方根),噪聲低至 15 mV p-p。
用戶可以通過過壓保護、電壓和電流預覽按鈕在任何時間查看上述參數的設定值(無需啟用相應的輸出)
標準內部電路,可縮短對下編程變化的響應時間
軟件
5 年質保
Common | ||||
Remote Sense | The maximum load line drop is up to the full voltage rating of the supply. The drop in the load leads subtracts from the maximum voltage available for the load except as follows: maximum rated voltage is available at the load and voltage regulation specifications apply for line drops of<1V on DLM5-75 and DLM8-75, <2V for all other DLM600 models | |||
Remote Programming | Voltage, current (0-100%) and OVP (5-110%) of full scale can be programmed by selectable 0-5VDC, 0-10VDC, or 0-5kΩ | |||
Remote Monitoring | Voltage or current can be monitored with user selectable ranges, scaled to 0-5 VDC or 0-10 VDC | |||
Operational Features | Master/slave parallel operation, up to 4 units of the same model can be connected in parallel, with active current sharing control. Series operation, multiple units of the same model can be connected in series, limited by 300Vpk between either output terminal and chassis. | |||
Software | IVI-COM, LabVIEW® or LabWindow®/CVI driver for Ethernet and IEEE-488.2 | |||
Regulatory Compliance |
CE Compliant: • Low Voltage Directive (73/23/EEC) using EN 61010-1, and • EMC Directive (89/336/EEC) using EN 61326 Certified to UL 61010-1, CSA C22.2 No. 61010.1 and IEC/EN 61010-1 |
Input | ||||
---|---|---|---|---|
Voltage and Frequency |
90-132 VAC or 180-264 VAC max, auto ranging, 47-63 Hz, single phase, 2-wire plus ground |
|||
Current | 11A maximum at 115VAC, 6A maximum at 230 VAC | |||
Connector | IEC 320 with detachable line cord | |||
Power Factor | 0.6, typical at full load; dependent on the impedance of the AC input. |
Output | ||||
---|---|---|---|---|
Line Regulation |
Voltage: 0.005% of V max + 2 mV Current: 0.01% of I max + 2 mA See table for input voltage variation over the AC input voltage range, with constant rated load. |
|||
Load Regulation |
Voltage: 0.005% of V max + 2 mV Current: 0.02% of I max + 5 mA See table For 0-100% load variation, with constant nominal line voltage |
|||
Transient Response | 500 μs to steady-state output voltage (within 0.1% of Vmax) for 50-100% or 100-50% load change | |||
Stability | ±0.05% of maximum voltage or current over 8 hours after 30 minute warm-up time at fixed line, load and temperature | |||
Efficiency | 84% typical at maximum output power; 82% typical for DLM 5-75 and DLM 8-75 | |||
Temperature Coefficient | 0.02%/°C of maximum output voltage, 0.03%/°C of maximum output current. Change in output per °C change in ambient temperature, with constant line and load. |
Physical | |||||
---|---|---|---|---|---|
Dimensions |
Width: 8.5” (216 mm) |
Weight & Shipping Weight | ||||
Weight | 9.7 lbs. (4.4 kg) | |||
Shipping Weight | 12.7 lbs. (5.8 kg) |
Output Ratings | |||||
---|---|---|---|---|---|
Model | Voltage | Current | Power | ||
DLM 5-75 | 0-5 VDC | 0-75 ADC | 375 W | ||
DLM 8-75 | 0-8 VDC | 0-75 ADC | 600 W | ||
DLM 10-60 | 0-10 VDC | 0-60 ADC | 600 W | ||
DLM 20-30 | 0-20 VDC | 0-30 ADC | 600 W | ||
DLM 40-15 | 0-40 VDC | 0-15 ADC | 600 W | ||
DLM 60-10 | 0-60 VDC | 0-10 ADC | 600 W | ||
DLM 80-7.5 | 0-80 VDC | 0-7.5 ADC | 600 W | ||
DLM 150-4 | 0-150 VDC | 0-4 ADC | 600 W | ||
DLM 300-2 | 0-300 VDC | 0-2 ADC | 600 W |
Output Ratings | |||||
---|---|---|---|---|---|
Model | Line Regulation | Load Regulation | |||
Voltage (0.005% of Vmax + 2 mV) | Current (0.01% of Imax + 2 mA) | Voltage (0.005% of Vmax + 2 mV) | Current (0.02% of Imax + 5 mA) | ||
DLM 5-75 | 2.25 mV | 9.5 mA | 2.25 mV | 20 mA | |
DLM 8-75 | 2.4 mV | 9.5 mA | 2.4 mV | 20 mA | |
DLM 10-60 | 2.5 mV | 8 mA | 2.5 mV | 17 mA | |
DLM 20-30 | 3 mV | 5 mA | 3 mV | 11 mA | |
DLM 40-15 | 4 mV | 3.5 mA | 4 mV | 8 mA | |
DLM 60-10 | 5 mV | 3 mA | 5 mV | 7 mA | |
DLM 80-7.5 | 6 mV |
尋找更多銷售、技術和解決方案的信息? 關于綠測
廣州綠測電子科技有限公司(簡稱:綠測科技)成立于2015年11月,是一家專注于耕耘測試與測量行業的技術開發公司。綠測科技以“工程師的測試管家”的理念向廣大客戶提供專業的管家服務。綠測科技的研發部及工廠設立于廣州番禺區,隨著公司業務的發展,先后在廣西南寧、深圳、廣州南沙、香港等地設立了機構。綠測科技經過深耕測試與測量領域多年,組建了一支經驗豐富的團隊,可為廣大客戶提供品質過硬的產品及測試技術服務等支持。 應用解決方案
產品與服務
![]() 綠測工場服務號
![]() 綠測科技訂閱號
020-2204 2442
Copyright @ 2015-2024 廣州綠測電子科技有限公司 版權所有 E-mail:Sales@greentest.com.cn 粵ICP備18033302號
|